Glow in the Dark Garment Vinyl


Garment vinyl that is white in ordinary conditions, but glows green in the dark! Like most glow in the dark items, it needs to be "charged" at a bright light source, and the glow will last a limited time before it needs "charging" again.

Widith 0.5m and priced at per half metre. ie 1 unit will get you 0.5 x 0.5m, 2 units will be 1 x 0.5m, and so on.

  • Suitable for use on polyester and cotton fabrics.
  • Can be washed at up to 60°C or your fabric's recommended temperature, whichever is lower.
  • Can be tumbled dried, depending on your fabric.
  • Not suitable for dry cleaning.

To use:

1. Draw your design onto the SHINY side of the vinyl.

2. Cut out your design and position it on the fabric, SHINY SIDE UP.

3. Press at 160°C for 15 seconds. For most irons 160°C is at the high end of the polyester range. If your iron does not show exact temperatures, test with sample pieces first. Remember to check if your fabric can work with this temperature!

4. Peel off shiny layer while still hot, and it's done.

Always practice on some scrap first!

If you have a contour cutter and a heat press, use this vinyl as you normally would with those equipment.